Basic Info.
Frequency Range
Low Frequency
Transport Package
Wooden Case/ Container
Specification
1mWidth*1.5mHeight*Length 3m
Product Description
- Product Brief
WG4000 Welding Gantry FixtureWG4000 Welding Gantry Fixture is a kind of large size fixture for welding workpiece with gantry style main frame. 2. Work conditions
- There should not be explosive or corruptive industrial gas,steam or chemical deposition that may cause serious harm to equipment at working-site.
- Temperature: -10ºC~40ºC
- Humidity: Max. humidity 90%
- Power: voltage fluctuation(for rated frequency)≤±10%
- Frequency variation(for rated voltage)≤±2%
3. Product Introduction:Main Units:This fixture is mainly composed of gantry-style welding frame, welding power source, and welding support unit (wire feeder, control console, etc.)Welding Fixture StructureThis welding gantry is mainly composed of columns of both sides, transverse beam, motor drive welding carriage, manual control cross-slides, and electric unit. The columns at both sides are for supporting transverse beam, making workpiece passing thru the beam. Rail is rectangular linear guideway, with both sides installed hard stop of limit switch, preventing welding carriage from dropping down. The motor-drive welding carriage is fit onto transverse beam by means of linear guideway, and driven with motor reducer. Travel speed of the welding carriage is controlled with inverter. There is one set of manual control cross-slides, for the ease of adjusting wire feeder to aim at welding seam. Welding torch is fit at bottom of welding carriage, by means of rotation, angle of the welding torch can be adjusted. Technical Parameters of Welding Gantry:No. | Component | Parameters | Note |
1 | Beam Length | 4000mm | |
2 | Stroke of Welding Carriage | 3400mm | |
3 | Welding Velocity | 100~1000mm/min | |
4 | Welding Velocity Control | VFD (Inverter) | |
5 | Horizontal and Vertical Stroke of Welding Head | 200mm | Manual Control |
6 | Welding Carriage Drive | Gear-Rack couple | |
7 | Welding Carriage Travel Rail | Precise Ball Bearing Liner Guideway | |
8 | Horizontal Revolve range of Welding torch | -30°~30° | |
9 | Height of Welding Gantry | Catering for 700mm height worktable | |
10 | Distance between Welding Torch and front surface of Beam | 400--500mm | |
Address:
Shang Tang Industrial Park, Qianqiao Town, Wuxi, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Manufacturing & Processing Machinery
Company Introduction:
Wuxi JACK Technology Co., Ltd. Was established on April 14, 2009-04-14. The enterprise address is located in Wuxi City, Huishan District, Luoshe Town, Yang shi street, No. Yang Dong Road, the industry for general equipment manufacturing, business scope includes: Machinery and equipment manufacturing, processing, sales; Mechanical equipment development and design; It is self-supporting and acting as an agent for the import and export of all kinds of commodities and technologies (except the commodities and technologies restricted by the state or prohibited from import and export).